A.R.T. ARTtrack2/C
© 2008 by EST · Last updated: 28.01.2008
The ARTtrack2/C is a modified ARTtrack2 camera built for usage in a multi-sided projection environment (with ceiling projection). Due to its slim construction (without IR-flash) only a small hole in the projections corner is necessary. The required IR light is emitted right through the projection walls by three external flashes.


Standard Accessory

Camera ARTtrack2/C is delivered with:

    • 1 power cord, 8m,
    • 1 power supply (100–240 Volt, 50-60 Hz),
    • 1 ethernet cable
      standard: 15m,
    • 1 BNC cable for synchronization
      standard: 15m,
    • 1 BNC T-junction,
    • 1 BNC terminator resistor,
    • 1 ceiling suspension D2,
    • focal length according to customers requirements
      standard: 3.5mm.

Additional for ARTflash2C:

  • 3 ARTflash2C,
  • 1 power cord, 8m,
  • 1 power supply (100–240 Volt, 50-60 Hz),
  • 1 BNC cable for synchronization
    standard: 15m,
  • 1 BNC T-junction,
  • 1 adapter and cable for power and BNC connection to ARTflash2C,
  • 3 ceiling suspensions D2.

All proprietary names and product names are trademarks or registered trademarks of their respective owners. EST doesn´t offer any guarantee for the technical details of the manufacturers.