Polhemus Accessories

Polhemus Accessories

Accessories

Polhemus offers a broad range of accessories that will help you create the best tracking or scanning solution in the marketplace. Whether you are tracking the motion of objects for complex medical applications, scanning items to obtain real-time 3D images, or capturing movement for virtual reality and animation, our line of accessories can help you do it better. Download accessories brochure.

Transmitters

TX1
A miniature transmitter developed for small tracking areas spanning 1 to 24 inches, the mini transmitter is compatible with all Polhemus sensors. Available for FASTRAK only. Note: the addition of a mini transmitter requires FASTRAK to be sent to Polhemus for board modification. Available with 10 or 20 foot cables. 0.9" L x 1.1" W x 0.6" H, .32 oz.

TX2
Perfect for use in small areas, this 2-inch transmitter has a range of 3 to 60 inches. It is the standard transmitter that comes with the FASTRAK, PATRIOT, LIBERTY, and FastSCAN systems. Available with 10 or 20 foot cables. 2.2" L x 2.2" W x 2.1" H, .72 lbs.

TX4
This new 4-inch transmitter offers 40% more range than the TX2. With an ideal operating range of 1 to 7 feet, it's perfect with FASTRAK, PATRIOT, LIBERTY, and FastSCAN systems. The TX4 uses the same mounting hole pattern as the TX2 so it is easily interchangeable. Available with 10 or 20 foot cables. 4.07" L x 4.07" W x 4.04" H. 1.60 lbs.

Long Ranger®
This robust transmitter increases range up to 15 feet. Ideal for tracking in large capture areas, it is used exclusively with the FASTRAK system and comes with a 50-foot cable. Transmitter is 18 inches in diameter.

Transmitter Stand
Long Ranger Tripod --A no hassle solution for correctly positioning your Long Ranger. Range of
adjustment approximately 4 to 8 feet high.

Receivers

RX2
The RX2 is the standard receiver for our FASTRAK, PATRIOT and LIBERTY systems. Designed for versatility, it is lightweight and comes complete with mounting hardware. Available with 10 or 20 foot cables. 0.9" L x 1.1" W x 0.6" H, .32 oz.

RX1-C
Developed to work in smaller environments, this flat-sided mini receiver works with FASTRAK, PATRIOT and LIBERTY systems. Available with 10 or 20 foot cables. 0.89" L x 0.50" W x 0.45" H, .13 oz.

RX1-D
This miniature receiver is teardrop in shape, making it ideal for those applications where the RX1-C is less suited. Compatible with the FASTRAK, PATRIOT and LIBERTY systems. Available with 10 or 20 foot cables. 0.375" L x 0.375" W x 0.375" H, .07 oz.

Styluses

ST8
Adding a stylus expands the capability of the FASTRAK, PATRIOT and LIBERTY systems into a free form digitizer ideal for creating files that can be used in the most popular computer graphics programs. With the stylus, both single and continuous output may be obtained. The stylus is offered with 10 or 20-foot cables and a rounded or sharp tip. 7" L x 0.5" W x 0.75" H, .75 oz.

ST3
A small 3 inch stylus allows access to those hard to reach places and turns the FASTRAK into a digitizer, capturing digital files that can be used in the most popular computer graphics programs. With the stylus, both single and continuous output may be obtained. The 3-inch stylus is offered with 10 or 20-foot cables and a rounded or sharp tip. 3.5" L x 0.5" W x 0.75" H, .45 oz.

Wanda™
Wanda is a hand held, thumb activated, interaction device designed to house a 6 DOF sensor and is comprised of three programmable buttons . Wanda can be used in free space, unlike a typical mouse or joystick, making it ideal for immersive display environments. It is supported in dozens of commercial applications via communication through VRCO's trackd software. Custom applications can also be supported using the trackdAPI. The Wanda is approximately 5-1/2" long x 2" wide x 2" deep."

All proprietary names and product names are trademarks or registered trademarks of their respective owners. EST doesn´t offer any guarantee for the technical details of the manufacturers.