pciBIRD
Ascension Technologies Corporation discontinued the production of the pciBIRD. Replacement products are the 3D Guidance trackSTAR and driveBAY.
- DC Magnetic tracker with an electronics card powered by the PCI bus on your personal computer.
- pciBIRD works with 1 or 2 sensors, either 8mm or 25 mm in diameter.
TRANSMITTER OPTIONS
APPLICATIONS
- Head/Hand/Object Tracking
- Virtual Reality
- Telerobotics/Telepresence
- Simulation & Training
- Scientific Visualization
- Medical Imaging
- Biomechanical/ Human Factors Analysis
- 3D Reconstruction of Ultrasound Images
- Surgical Planning & Intervention
- Intra-body navigation
- 3D Graphics Control & Manipulation
FEATURES & BENEFITS
| Pulsed DC magnetic tracking | Five times less susceptible to distortion caused by nearby metal than AC technology. / No occlusion - can track through tissue and bone. |
| Track 25mm or 8mm sensor | Custom solutions for your project. |
| Multiple 8 mm sensor configuration | Small footprint permits tracking in confined spaces. / Two sensors on one card is cost-effective. / Miniaturized for use with instruments and the human body. |
| Full-size pci card | Easily integrated to OEM computers. |
| Position & orientation measurements | Precise tracking of medical instruments, scopes, probes, and body parts in real time. |
| 1 mm accuracy | Highly accurate tracking gives confidence to end-user. / Allows precise quantitative measurements in 3D ultrasound. / Assists in precise navigation in surgery and biopsy needle tracking. |
| Sub-millimeter accuracy in smaller volumes | High accuracy gives confidence to medical users. |
| Class B radiated EMI, IEC 60601-1 and 60601-1-2 compliant | Safe and appropriate for hospital/clinic/laboratory use. / Easy to integrate to OEM application. |
| Windows API | Easy command functions to simplify connectivity to your software. / API interface receives and processes data from either sensor (in dual 8mm sensor configuration). |
| ISO 9001 compliance | Confidence in consistency of quality and established credibility. |
SPECIFICATIONS
| TECHNICAL | |
| Degrees of Freedom | 6 (Position and Orientation) |
| Translation range | ±76.2cm in any direction |
| Angular range | All Attitude: ±180° Azimuth & Roll |
| Static Accuracy Position* (25mm Sensor) | 1.0mm RMS |
| Static Accuracy Position* (8mm Sensor) | 1.4mm RMS |
| Static Accuracy Orientation* (25mm Sensor) | 0.15° RMS |
| Static Accuracy Orientation* (8mm Sensor) | 0.5° RMS |
| Static Resolution Position | 0.5mm @ 30.5cm |
| Static Resolution Orientation | 0.1° @ 30.5cm |
| Update rate | Up to 105 measurements/ sec |
| Outputs | X,Y,Z positional coordinates, orientation angles, orientation matrix |
| Interface | PCI v. 2.1 compliant when standard I/O locations used at rear of card. Requires power supply Molex power connector to meet power needs. |
| Format | Binary |
| Modes | Point or stream |
| PHYSICAL | |
| Transmitter | Mid-Range: 9.6cm cube with 3.05m cable |
| 25mm Sensor | 25mm x 25mm x 20mm cube, 3m cable |
| Weight | 21 g (0.7 oz) without cable, 169 g (6 oz) with cable |
| 8mm Sensor | 18mm x 8mm x 8mm, 3m cable |
| Weight | 1.2 g (.04 oz) without cable, 126 g (4.4 oz) with cable |
| PCI Card | Standard full length board, 339.73mm in length. The host computer must have slot(s) that can accept full length PCI card(s). |
| Power | +12V at 1.85amps nominal standard transmitter, 2.5A max +5V 1.7A nominal |
| Operating Temp | 15° C to 35° C |
| Warm-up | System shall meet accuracy specifications after 5 min. |
* Accuracy verified over range from 20.3cm to 76.2cm
pciBIRD is a general-purpose motion tracker suitable for many applications. Biomedical references in this document are examples of what medical companies have done with Ascension trackers after obtaining all necessary medical certifications. Ascension trackers are not certified for use in medicine without the end user/OEM complying with all pertinent FDA/CE regulatory requirements
REGULATORY
- EMC:
- EN60601-1-2
- CISPR 11 Class B limit
- FCC
- 47 CFR: Part 15; Subpart B; Class B limit
- Safety:
- EN60601-1
- Class I medical device
- Type B Applied part







