Improv Hardware Specifications

CAMERAS:

• Dimensions: 108 mm x 92 mm x 57 mm (4.25" x 3.62" x 2.25")
• Weight: 380 grams (13.4 ounces)
• Each camera achieves an Optical Resolution of 3600 x 3600 (12 Megapixel) using two linear detectors with 16-bit dynamic range. Onboard processors produce an impressive Subpixel Resolution of 30,000 x 30,000 at 240 Hz.

LED BASE STATION:

• Dimensions: 127 mm x 76 mm x 30 mm (5" x 3" x 1.2")
• Weight: 136 grams (0.3lbs)
• This 2.4 Ghz Transceiver synchronizes the LED controllers with the server.

LED CONTROLLERS:

• Dimensions: 126 mm x 70 mm x 25 mm (5" x 2.75" x 0.85")
• Weight: 90 grams (0.2lbs)
• The LED Controller, an RF transceiver, utilizes an onboard microprocessor to control up to 42 LEDs. Battery life is 2 to 4 hours of continual use, up to 8 hours of typical use. The IMPROV system can use multiple LED Controllers simultaneously.

ACTIVE LED:

• Dimensions: 20 mm x 14 mm x 3.2 mm (0.8" x 0.55"
• Weight: 4.5 grams (0.01lbs)
• Each LED modulates at a unique frequency resulting in a unique digital ID. LEDs are available in Red visible and Infra-red versions.

SERVER COMPUTER:

• Dimensions: 44.76 x 17.78 x 45.43cm (17.6 x 7 x 17.9in)
• Weight: Starting at 10.7 kg
• Processor: Intel Core i3-540 Processor (3.06 GHz, 4 MB cache, 1333 MHz memory)
• Chipset:Intel 3450 Chipset
• Memory: 4GB
• integrated PhaseSpace HUB in floppy bay drive
• Network: Gigabit

CALIBRATION WAND:

• The calibration wand serves as the principal tool used to accurately calibrate the system. The calibration wand allows a user to calibrate the given capture area in a matter of minutes.

CONFIGURATION:

• The IMPROV system uses standard Cat5 cables to connect between the cameras, basestation, and server.